PRODUKTE - BEDIENGERÄTE- HI1202

PRODUKTE | ÜBER DITEL | VERTRIEB | KONTAKT | NEWS | DOWNLOADS | SUPPORT | VERSCHIEDENES

DISEÑOS Y TECNOLOGIA, S.A.
P. I. Les Guixeres C/ Xarol 8 C
08915 BADALONA-SPAIN
Tel : +34 - 93 339 47 58
Fax : +34 - 93 490 31 45
E-mail : dtl@ditel.es

HIMOS HI1200 and HI1202 operator interfaces provide man-machine interface for PLCs / Inverters. The user can implement PLC logic using standard ladder logic programming. The HIMOS unit has four high speed counters (25 kHz each), hundreds of timers and counters, thousands of internal coils, retentive and non retentive memory registers and PID functionality.
Can communicate with PLCs using its serial communication ports to fetch the information requested by the operator. This information can be either the value of a PLC register or the status of an I/O, or whatever other PLC parameter available.

This information can be displayed on HI575/HI576 screen, and if required, the HMI can also modify the value of these PLC registers or parameters.
It is also possible to provide the HMI with I/O, either analogue or digital, thanks to remote I/O modules available for the HIMOS Series.

HI1200 has 2 serial communication ports, and HI1202 has also 2 serial communication ports plus 1 Ethernet port and 1 USB port. Direct connection to Modbus RTU protocol and other opened protocols and to most of PLCs. They can communicate with two different PLCs simultaneously.
PLC task can be executed on power up, during continuous scanning, when a specific screen is showing, or when a specific wizard event occurs. Allows local or global assignation of keys to macros for key processes.

Datenblatt
Quick start
Garantie