PRODUCTS - DIGITAL METERS SERIE KOSMOS - PICA100-P
DISEÑOS Y TECNOLOGIA, S.A.
P. I. Les Guixeres
C/ Xarol 8 C
08915 BADALONA-SPAIN
Tel : +34 - 93 339 47 58
Fax : +34 - 93 490 31 45
E-mail : dtl@ditel.es
PICA100-P, instrument of the KOSMOS series, size 1/32 DIN with 4 digits LED red 8 mm high, designed for measuring process signals in range from 0 to 10 V, 0 to 20 mA, 4 to 20 mA with power supply for the transducer incorporated, easily scalable in engineering units, via keyboard or field signal.
Incorporates others inputs, from 0 to 60 Vdc that allows voltages measurements like batteries of 12, 24 or 48 V and from 0 to 100 mV adequate for connection with Shunts of 50, 60 or 100 mV that allows measurements of tensions up to ± 2000 A. Its two supply ranges makes it useful for industrial applications like installations with batteries. For this reason, it is a very useful equipment for nautical applications especially for measurement and control of batteries or tanks of irregular shape thanks to the linearization of ramps option incorporated on this instrument.
Its two mounted relays allows this instrument not only to measure but also to be able to control, regulate and detect alarms for the mentioned signals.
Tanks to its communication option RS4P (RS485) it can be integrated within a measurement system and is able to provide information via its MODBUS-RTU protocol, and can be totally configured by PC with a free el software available in www.ditel.es
Incorporates three keys located on the font bottom for the configuration of all the parameters.
Its brightness level is programmable with 4 levels in order to adapt it to the environment where it works. Registers the minimum and maximum process value since its commissioning or resetting. Offers the possibility to make a tare (display value absorption) that can be locked out at any time.
The output options are isolated from the input and the power supply.
Incorporates others inputs, from 0 to 60 Vdc that allows voltages measurements like batteries of 12, 24 or 48 V and from 0 to 100 mV adequate for connection with Shunts of 50, 60 or 100 mV that allows measurements of tensions up to ± 2000 A. Its two supply ranges makes it useful for industrial applications like installations with batteries. For this reason, it is a very useful equipment for nautical applications especially for measurement and control of batteries or tanks of irregular shape thanks to the linearization of ramps option incorporated on this instrument.
Its two mounted relays allows this instrument not only to measure but also to be able to control, regulate and detect alarms for the mentioned signals.
Tanks to its communication option RS4P (RS485) it can be integrated within a measurement system and is able to provide information via its MODBUS-RTU protocol, and can be totally configured by PC with a free el software available in www.ditel.es
Incorporates three keys located on the font bottom for the configuration of all the parameters.
Its brightness level is programmable with 4 levels in order to adapt it to the environment where it works. Registers the minimum and maximum process value since its commissioning or resetting. Offers the possibility to make a tare (display value absorption) that can be locked out at any time.
The output options are isolated from the input and the power supply.
| PRODUCTS | ABOUT DITEL | DISTRIBUTORS | DOWNLOADS | SUPPORT | MISCELLANEOUS | |
| Digital panel meters | Display numeric | DITEL quality | By country | Manuals | Tech support | Ought to know! |
| Temperature controllers | Display alphanumeric | Warranty | Brochure | Links | ||
| LCD counters | Non-contact thermometers | How to arrive | CONTACT | Software | ||
| Isolators | Human machine interfaces | Contact | Old manuals | NEWS | ||
| Converters | Accesories | News |